How to Clean My Bearpaw Boots? Guide to Clean Inside & Outside

Cleaning the Bearpaw boots is different from cleaning other boots. That’s why we thought to help you out by sharing the easy and perfect guide to cleaning these boots. Bearpaw boots are the most popular winter boots in North America, which can withstand inclement weather. But they need the proper care to make them stay for a long time to get the maximum benefits from them. You may know how to clean the leather boots as they require polishes, creams, and oils to get rid of the grime. But their uppers may not be as easy to clean. You need to clean your Bearpaw boots inside and outside to make them look good and smell fresh.

How to Clean My Bearpaw Boots

The cleaning of the Bearpaw boots requires careful attention. You can’t wash your Bearpaw boots in a washing machine or dryer as it’s not advisable. Moreover, their soaking in water can cause them to shrink or stretch, which can ruin their suede surface. So, this article will give you some useful tips to clean your Bearpaw boots. You can divide your Bearpaw Boots cleaning process into two parts. The first one is the cleaning of the outer part of the Bear paw boots, and the second one is the cleaning of their inner part.

Cleaning of the Outer Part of Bearpaw Boots

In this phase, you have to clean all the outer parts of the Bearpaw boots. The following steps make it easier for you to clean the outer part of Bearpaw boots.

1- Gently brush the boots

Brush the Boots

After each wear, you have to gently brush the outer surface of your Bearpaw boots with the suede brush to remove the dust and loose dirt particles. Start from the top and go to the down as it also helps you to remove any thin fibers strands. This is an important step before the deep cleaning of the Bearpaw boots.

2- Use the damp cloth or sponge with water

Clean bearpaw boots with Damp Cloth

Now, damp cloth or a soft sponge in water and squeeze it to remove the excess water. Wipe your boots’ upper with this sponge or cloth. Make sure not to soak your boots in the water, especially don’t put them under the running water as it can ruin their woolly skin.

3- Use a suede cleaner

Use Suede Cleaner

After wiping the outer surface of your Bearpaw boots, you have to apply a few drops of suede cleaner on the suede part of your boots. Make sure to wipe each boot gently until it’s fully saturated. Follow the suede cleaner guidelines by starting from the top and moving downwards in circular strokes. Don’t over saturate the boots as it can decrease the lifespan of your Bearpaw boots.

4- Wipe off the suede cleaner

Once the Bearpaw boots have soaked the soapy suede cleaning mixture, you have to rinse the sponge and begin the boots wiping. Repeat this process multiple times to remove the suede cleaner from your boots.

5- Let the boots dry

After cleaning your Bearpaw boots, leave them in a well-ventilated spot to naturally air dry your boots. You can stuff them with toilet tissue or old newspaper so that they can maintain their original shape.

6- Spray the boots

Use stain repellent to clean bearpaw boots

When your Bearpaw boots completely dry up, spray the strong stain and water repellant. This will protect them from dust and dirt particles.

Cleaning of the Inner Part of the Bearpaw Boots

The wooly and fluffy appearance of the Bearpaw boots is very important in keeping your feet warm in the cold season. Even many people also wear these boots without socks due to their plush and cozy interiors. But it can make them smell, especially if you have sweaty feet. So, you can follow the below steps to perfectly clean out the inside of your Bearpaw boots.

1- Wipe the Bearpaw boots using disinfectant

You can use the disinfectant with wipes to clean the inside of your boots. Mix the disinfectant with warm water, and soak a clean cloth in the solution. After that, rinse it thoroughly and gently wipe the interior. You can also use antifungal spray on the interior of your boots.

2- Leave them to dry

After wiping the interior, leave the boots to dry naturally for at least 24 hours. You can sprinkle a spoon of baking soda into your boots to get rid of the stinky odor. Leave them for at least 24 hours, so the baking soda can settle perfectly. Finally, take a clean, dry towel and wipe off the baking soda.

How to Remove Water Stains From Bearpaw Boots?

You can use the suede or soft-bristled brush to remove the water stains from Bearpaw boots. Follow the below steps to easily remove water stains from Bearpaw boots.

  • Firstly, remove the dust or dirt from the upper layer of the boots by using the suede, sponge, or a soft brush. If it’s not enough, you can also apply the detergent to clean the leather, but make sure to be gentle.
  • Rub the stained area thoroughly, and wipe away the excess mud from the soles with a wet towel.
  • Make sure to not over saturate or soak the Bearpaw boots, and air dry them naturally.
  • Don’t use the heater or blow dryer as the upper boot material can lose its softness.

How to Remove the Tough Oil Stains From the Bearpaw Boots?

Removing Oil Stains

You can use Talcum powder or chalk to remove the tough oil stains. Follow the below steps to remove the tough oil stains from your Bearpaw boots.

  • Apply a decent layer of powder over the oily stains, and let it stay on the boots for at least an entire day. Brush the powder and check if the stains are removed. If the stains are still there, repeat the process until the stains are removed.
  • If you are using the chalk, apply it to the stains and leave. After some time, wipe or brush away the powder from the boots. Repeat the process until you get rid of all the oily stains.

How to Remove the Scuff Marks From the Bearpaw Boots?

You can use an eraser or a towel to remove the scuff marks. Follow the below steps to easily remove the scuff marks from your Bearpaw boots.

  • Take an artist eraser or a clean white towel to buff away the scuff. Don’t rub too hard, and follow the proper direction.
  • One way motion of the hands is perfect as the changing of movement can create ripples in the area. Finish the cleaning by lifting the nap with a suede brush.

How to Remove the Salt Stains From the Bearpaw Boots?

You can remove the salt stains with vinegar and water. Follow the below steps to remove the salt stains from your Bearpaw boots.

  • Mix the tablespoon of vinegar with lukewarm water in a bowl. Dip the towel in the solution and apply it to the salt-stained area.
  • The acetic acid in the vinegar can easily dissolve the salt. Finish the process by applying the plain water all over until they are evenly wet.
  • Don’t soak the entire boots in the water. When the boots are completely dry, brush them with a suede brush to lift the nap.

How to Remove Chewing Gum or Ink Stains From Bearpaw Boots?

You can rub alcohol or ice to remove the chewing gum or ink stains. Follow the below steps to easily remove the chewing gum or ink stains.

  • Soak a tissue or paper towel in the bowl of rubbing alcohol for a few minutes and apply it to the affected place.
  • Don’t rub it on the affected area; simply keep it on the stained area.
  • After that, if the stain looks fresh, scrub it with a hard brush or, even better, sandpaper.
  • If the chewing gum is stuck onto your boots, simply put your Bearpaw boots in the fridge or take an ice pack and stick it directly onto the gum. This will make the gum hard enough to remove with a brush or hand.
  • After that, you can also brush the affected area with a soft-bristled brush to remove any extra dirt traces of gum.

How to Keep My Bearpaw Boots Clean All the Time?

You can use the Bearpaw cleaning kit to keep your boots clean all the time. This kit keeps your boots looking new. For the best results, you can also clean your boots with UGG cleaner or conditioner before application. Don’t worry, as these products will not cause any damage to your Bearpaw boots. In fact, these are exactly the same as the material used during the manufacturing of the Bearpaw boots. The kit contains an entire set of cleaner and conditioner, water and stain repellent, and freshener. Make sure to shake well before applying to clean, and hold the bottle 6 inches away from the surface. Spray evenly to the surface until it’s wet but not soaked. Once the boot is dry, brush it with the suede brush in a single direction to restore its original appearance.

Some Important Tips About Bearpaw Boots

  • After cleaning your Bearpaw boots, you can stuff towels or rolled up scrap into them to keep them in good shape for longer. In this way, they won’t lose their original shape.
  • Make sure to store them in a cool and dry place, away from the direct sun, as it can harm the soft layers of the boot.
  • Don’t put the Bearpaw boots in the washer or washing machine as it can damage the boot surface. Even in the worst cases, it can also change their shape and size.
  • Place a couple of baking soda or cornstarch teaspoons into the boots to keep their odors out. Leave the powder mixture to stay inside for a few hours and dump it out once you are ready to wear them.

The Bottom Line

Bearpaw boots require some special attention while cleaning as compared to leather boots. They require some sophisticated ways to clean them as compared to the simple polishing of the leather boots with special oils and creams. We have discussed some simple ways to clean the Bearpaw boots from the outside and inside. So, if you are struggling with cleaning your Bearpaw boots, you can use this simple guide to give a brand new look to your Bearpaw boots.

Similar Posts

Leave a Reply

Your email address will not be published.